Page 51
DH1 BASE UNIT / DH2 WIRELESS GATEWAY
USER GUIDE
26.
MAPPING AN IMPORT TO AN OUTPUT ON
DH1 BASE UNIT
With the Wireless Gateway, any import point can be mapped to an
available output in the same network whether it be to a DH1 Base Unit,
Wireless Multi-I/O Module, or another device with an output.
An import point can also be a function created by a Modbus Write function
so that the point can be written by a third-party Master device such a RTU
or PLC.
1.
Create a Modbus Write function
see sec. 24
2.
Share import point from Gateway to DH1 Base Unit using peer-to-
peer feature
see sec. 25
3.
Double-click on a DH1 Base Unit in project tree
4.
Right-click on a desired import point and select “copy”
5.
Click on Outputs tab
6.
Right-click over desired output target and select paste output
source
7.
Save project file and update both Gateways for changes to take into
effect
Controlled Copy
