Page 24
DH1 BASE UNIT / DH2 WIRELESS GATEWAY
USER GUIDE
4.
RF Settings
a.
Select
Frequency
that matches the Radio Frequency (RF) of the wireless
devices
b.
Select
Channel
to avoid any RF conflict with any nearby sites
c.
Select
Group -
by default, the first Gateway you add to the site will be
assigned to Group 0. The second Gateway added will be assigned Group 1
and so on.
d.
Click
Next
5.
Configure Primary Wireless Gateway / RTU Port 1 Settings
a.
Create
Gateway Name
b.
Select
Gateway Type
: DH1 Base Unit or DH2
c.
Select
Tx Power
- (Note: Selecting higher Tx Power consumes more
power)
d.
Select
RTU Port
RS232 or RS485 (Terminal Block)
This port is used for connecting to a Master Device: PLC, RTU,
DCS, HMI, or EFM.
If using Gateway as a Master, the RTU port settings can be
changed after exiting the Project Creation Wizard.
see sec. 16
e.
Select
Slave ID
f.
Select
Baud Rate
that matches the Master device
g.
Click
Next
Controlled Copy
