Oleo-Mac OM 106, Operators Instruction Book

Page: 53 / 344

53
(continued)
INTERVAL ASSEMBLY ACTIVITY
AFTER 50 HOURS
Air filter and spark plugs Inspection, replacement if necessary 1,2 6.3.2
Lubrication Lubrication of parts according to lubrication plan 6.4
AFTER 100 HOURS
Engine, transmission,
electromagnetic transmission
Inspection and adjustment of motion N
MONTHLY
Tyres Inspection of pressure 6.2.1
Mowing deck Inspection of tension of the cogged blade drive belt 6.3.9
BEFORE THE
SEASON
Fuel filter Replacement N
Battery Inspection of electrolyte and cleaning 6.3.1
Travel drive belt Inspection and adjustment 6.3.12
Mowing deck
Inspection of tension of the cogged blade drive belt 6.3.9
Inspection of the correct tension of the mowing deck
drive V-belt
6.3.8
Front axle and steering Inspection and adjustment of play 6.3.11
AFTER THE
SEASON
(PUTTING OUT OF
OPERATION)
Engine Oil change 6.3.2
Cables Inspection of mounting, inspection of quick coupler parts 6.2.1
Mowing deck Cleaning 6.2.2
Explanations for table:
1 = Replace more frequently if the riding mower is under greater load or works in outdoor temperatures around 35°C or higher.
2 = If the machine works in a dusty environment, perform the inspection more frequently.
3 = Perform the inspection more frequently if the machine works in a sandy environment.
4 = Perform the inspection more often if a new belt has been fitted.
N = Manual of the manufacturer, supplied with the machine.
Apart from regular maintenance according to the above table, it is necessary to replace motor oil based on the recommendations in
the manual drawn up by the engine manufacturer, which is included with the riding mower.