![background image](http://html1.mh-extra.com/html/okidata/ml393c-plus/ml393c-plus_service-manual_729925192.webp)
Page: 125
Service Guide ML393/ML393CPlus
Chapter 4 Failure Analysis
4.4.04 Tips for Preventing Image Problems
1. Make sure that the ribbon is not "dried out". If the printer output is faded, install a new ribbon, then print
another sample.
2. Make sure that the paper you are using is within specifications.
Paper specifications can be found in
Section 1 of this Service Handbook
.
3. Always place the Head Gap Lever in the position appropriate for the paper that you are using.
Setting
Paper Type
1
12 - 15 lb. paper
2
20 - 24 lb. paper
3 - 4
Labels
3 - 4
Two-part forms
4 - 5
Three-part forms
7
Four-part forms
5 - 9
Envelopes
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)