Page: 68
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
3.2.16 Bail/Ribbon Motor Assembly
1. Remove the upper cover assembly
(3.2.04
).
2. Remove the printer mechanism
(3.2.09
).
3. Disconnect connector CN2 (1).
4. Remove the two mounting screws (2).
5. Detach the bail/ribbon motor assembly (3).
NOTE:
When assembling, install the bail/ribbon motor assembly so that the gear teeth contact properly. The
gears must not bind together.
P/N 56506301 Motor: Step (Bail Arm) Assembly
RSPL B.2.07
, B.2.10
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)