Page: 81
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
3.2.26 Bail Open Cam and Bail Open Gear
1. Remove the printer mechanism
(3.2.08
).
2. Detach the E snap ring (1).
3. Remove the bail open gear (2).
4. Remove the bail open cam (3).
5. Remove the plastic ring (4).
Caution:
Installation
When installing, make sure that the plastic ring is positioned against the rim on the bail open cam.
Installation may be easier if the bail open cam is installed on the shaft first, followed by the bail open gear.
Press down on the spring (5) slightly when installing the cam and ring.
The plastic ring MUST rest against the spring.
P/N 50911001 Spring: Brake - B (Color) RSPL B.2.10
P/N 51222601 Cam: Bail Open (Color) RSPL B.2.10
P/N 51214601 Gear: Bail Open (Color) RSPL B.2.10
