Page: 103
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
Limited Operation
General Information
The Operator Panel Functions Item in the Printer Menu can be set to either Full Operation or Limited
Operation. If the printer is part of a customized system or if it is used by different operators, a system
manager may be using this feature to maintain proper print settings.
FONT, PRINT QUALITY, and CHARACTER PITCH (on the operator panel) do not work when the printer
is set for Limited Operation.
Procedure
CAUTION:
Check with the system manager BEFORE changing the setting for the operator panel function!
1. Verify that paper is loaded and that the ribbon is installed.
2. Power OFF the printer.
3. Press and hold QUIET while powering ON the printer.
4. Press GROUP until GENERAL CONTROL prints.
5. Press ITEM until OPERATOR PANEL FUNCTIONS prints.
6. Press SET until FULL OPERATION prints.
7. Press EXIT to save any changes and exit Menu Mode.
8. The printer will go ON-LINE. (SELECT will light.)
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
