Page: 98
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
Menu Mode
CAUTION:
If the Menu is set for wide paper, and narrow paper is used, the printhead will print on the platen. This
could damage / destroy the printhead, platen, and ribbon.
To place the printer in the Menu Mode, follow this procedure.
1. Verify that continuous feed paper is installed.
2. Verify that the ribbon is correctly installed.
3. Verify that the width of the installed paper matches the paper width menu setting.
4. Press SELECT and place the printer OFF-LINE (SELECT will
NOT
be lit).
5. Press QUIET to enter Menu Mode.
6. The line shown below will print.
Font Print Quality LQ
7. Go to Step A to print the current menu.
Go to Step B to change the menu.
Step A
Press PRINT to print the current Menu.
Press EXIT to exit Menu Mode.
The printer will go ON-LINE. (SELECT will light.)
Step B
When the printer is in Menu Mode, the functions shown below the switches on the operator panel are
active.
Press GROUP to move through the groups of the Menu. A line prints, showing the Group.
Press ITEM to move through the items in a group. A line prints, showing the Item.
Press SET to change the setting for an item. A line prints, showing the Setting.
Press EXIT to save any changes and exit Menu Mode.
The printer will go ON-LINE. (SELECT will light.)
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
