Page: 87
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
3.2.31 Side Cover
1. Power OFF the printer.
2. Remove the cut sheet feeder.
3. Disengage the rear-bin unit from the front-bin unit
(3.2.30
).
4. Remove the three screws (1).
5. Remove the bolt (2).
6. Remove the collar (3).
7. Remove the left side cover (4) of the front-bin unit.
8. Remove the three screws (5).
9. Remove the bolt (6).
10. Remove the collar (7).
11. Remove the right side cover (8) of the front-bin unit.
12. Remove the two screws (9).
13. Remove the bolt (10).
14. Remove the collar (11).
15. Remove the left side cover (12) of the rear-bin unit.
16. Remove the two screws (13).
17. Remove the bolt (14).
18. Remove the collar (15).
19. Remove the left side cover (16) of the rear-bin unit.