Page: 67
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
3.2.15 Space Belt
1. Remove the printhead
(3.2.01
).
2. Remove the upper cover assembly
(3.2.04
).
3. Remove the head cable assembly
(3.2.11
).
4. Remove the space motor assembly
(3.2.14
).
5. Remove the mounting screw (1).
6. Detach the belt clamp (2).
7. Remove the idle pulley (3) from the idle pulley shaft (4) and detach the mini-pitch space belt (5).
NOTE:
When installing the belt clamp, make sure that the ribbed side is facing up as shown.
P/N 50702301 Clamp: Belt RSPL
B.2.12
, B.2.13
P/N 51215601 Pulley: Idle
B.2.08
, B2.11
P/N 53327801 Shaft: Idle Pulley
B.2.08
, B2.11
P/N 51303101 Belt: Mini Pitch (Space) RSPL
B.2.12
, B.2.13
