![background image](http://html1.mh-extra.com/html/okidata/ml393c-plus/ml393c-plus_service-manual_729925105.webp)
Page: 69
Service Guide ML393/ML393CPlus
Chapter 3 Maintenance
3.2.17 Paper Bail Assembly
1. Remove the upper cover assembly
(3.2.04
).
2. Remove the printer mechanism
(3.2.08
).
3. Remove the bail/ribbon motor assembly
(3.2.16
).
4. Detach the left bail arm spring (1A) and right bail arm spring (1B).
5. Remove the bail arm idle gear (2).
6. Detach the E snap ring and remove the bail open cam (3).
7. Detach the E snap ring (4) and remove the left bail arm (5) from the indicator shaft assembly (6) by
pulling to the left.
8. Remove the right bail arm (7) by pulling to the right while expanding the clamps (8).
9. Detach the right bail arm from the indicator shaft assembly.
NOTE:
Installation
The left bail arm spring (1A) is longer than the right bail arm spring (1B). Be sure to install each spring on
the proper side.
P/N 50910701 Spring: Bail Arm (Left)
RSPL B.2.07
, B.2.10
P/N 50910801 Spring: Bail Arm (Right)
RSPL B.2.07
, B.2.10
P/N 51210201 Gear: Idle (Bail Arm)
RSPL B.2.07
, B.2.10
P/N 51214701 Cam: Bail Open (Black)
RSPL B.2.07
P/N 53478501 Arm: Left Bail
RSPL B.2.07
, B.2.10
P/N 50054401 Assembly: Indicator Shaft
RSPL B.2.07
, B.2.10
P/N 53478502 Arm: Right Bail
RSPL B.2.07
, B.2.10