Page: 48
Service Guide ML380
Chapter 3 Maintenance & Disassembly
3.2.14 Platen Assembly
1. Perform these procedures: 3.2.01
and 3.2.03
.
2. Pull lock levers (1) in the direction of arrow A, and raising them at an angle of 90°. This releases the
platen assembly (2) from the main frame (3).
3. Lift the A side of the platen assembly until the B side clears the release lever (4).
NOTES:
After installation, check that the platen gear engages firmly with the line feed motor gear and that the
platen rotates smoothly.
Set the release lever to OPEN (front) and check that the groove (5) of the paper chute firmly engages with
the groove (6) of the main frame. Then, lock the platen assembly.
P/N 50061305 Platen: (Assembly) RSPL B.2.04
Summary of Contents for ML380
