Page: 40
Service Guide ML380
Chapter 3 Maintenance & Disassembly
3.2.06 Mini-Pitch (Space) Belt
1. Perform these procedures: 3.2.02
and 3.2.05.
2. Use pliers to remove the belt tension spring (1).
3. Loosen the screw (2).
4. Remove the belt (3) from the idle pulley (4).
5. Remove the head connector assembly (5) from the carriage plate (6).
6. Remove the carriage plate.
7. Detach the belt from the space motor assembly gear (7).
8. Remove the belt clamp (8) mounted to bottom of the carriage plate.
9. Use a screwdriver to push the claw of the belt clamp in the direction of arrow A. Then, remove the belt
clamp and belt by lowering the claw in the direction of arrow B.
NOTE:
Perform the space belt tension adjustment procedure after installing this part.
Refer to Section 3.3 of this Service Handbook.
P/N 50904801 Spring: Coil RSPL B.2.04
P/N 51304001 Belt: Mini-Pitch (Space Belt) RSPL B.2.06
P/N N/A Screw: Self Tapping B.2.04
P/N 51004001 Slider RSPL B.2.06
P/N 51219201 Pulley: Idle RSPL B.2.04
P/N 53330401 Plate: Carriage RSPL B.2.06
P/N 50704701 Clamp: Belt RSPL B.2.06
P/N 53330301 Bracket: Idle Pulley RSPL B.2.04
Summary of Contents for ML380
