Page: 49
Service Guide ML380
Chapter 3 Maintenance & Disassembly
3.2.15 Pressure Roller Assembly
1. Perform these procedures: 3.2.01
, 3.2.03
and 3.2.14
.
2. Remove the paper chute (1). Be careful not to damage the grounding strap.
3. Open the claw (2), and remove the paper release lever (3).
4. Remove the change gear (4) and the spring (5).
5. Remove the idle gear (6).
6. Remove the boss (7) from the guide hole (8) of the main frame (9), and remove the release link (10).
7. Pull part A of the pressure roller assembly shaft (11) out of the main frame, in the direction of arrow B.
8. Pull the C part of the pressure roller assembly shaft out of the main frame in the direction of arrow D.
9. Remove the shaft.
NOTES:
Installation
Position the tab (12) of the paper chute firmly with the groove (13) of the main frame.
Engage the cut-sheet paper end lever (14), attached to bottom of paper chute, to the bottom paper end
lever (15) under the main frame, and install the paper chute.
The Kit: Idler/Change Gear (ML300) includes the change and idler gears. Order this kit when replacing
these parts.
P/N 50071701 Chute: Paper (Assembly) RSPL B.2.05
P/N 53511201 Lever: Release RSPL B.2.05
P/N 51219101 Gear: Change RSPL B.2.05
P/N 50915101 Spring: Change Gear RSPL B.2.05
P/N 58227501 Kit: Idler/Change Gear (ML300) RSPL B.2.05
P/N 51216001 Gear: Idler B.2.05
P/N 53511301 Link: Release RSPL B.2.05
P/N 50071601 Roller: Pressure (Assembly) RSPL B.2.05
Summary of Contents for ML380
