manualshive.com logo in svg

OKIDATA ML380, Service Manual

Share
Download
OKIDATA ML380 Service Manual Download Page 121

Page: 79

Service Guide ML380

Chapter 4 Failure & Repair Analysis

 
4.1.03 Firmware Revision Identification

To identify the revision level and part number of the firmware, print the Rolling ASCII Test or the Font 
Test.

Refer to Section 4.8 for information on printing the tests.

Header

At the top of each test is a header.

This header provides the following information: printer model (1) , emulation (2), version (3), firmware 
revision number (4), firmware part number (5), character generator revision number (6), and character 
generator part number (7).

ML380 EPS A F/W 03.01 YR4077-xxxx RES 01.00 YR4084-xxxx 1 2 3 4 5
7 6

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for ML380














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands