Page: 64
Service Guide ML380
Chapter 3 Maintenance & Disassembly
From Power-OFF
CAUTION:
Make sure that paper is installed or the printhead will print on the platen. This could damage / destroy the
printhead, platen, and ribbon.
1. Verify that continuous feed paper is installed.
2. Verify that the ribbon is correctly installed.
3. Verify that the printer is powered-OFF.
4. Press and hold FONT while powering-ON the printer.
5. The POWER lamp will light. The SELECT lamp will not light. MENU MODE will print on the paper.
6. Use the control panel to make menu changes.
Press GROUP to move to the next group in the menu.
Press ITEM to move to the next item within a group.
Press SET to move to the next setting of an item.
7. Press EXIT to save the change(s) and return to Print Mode.
8. The SELECT lamp will light.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Summary of Contents for ML380
