manualshive.com logo in svg

OKIDATA ML380, Service Manual

Share
Download
OKIDATA ML380 Service Manual Download Page 28

Page: 17

Service Guide ML380

Chapter 2 Principles of Operation

 
2.1.04 Interface Control

Parallel Interface

The data from the interface is received through connector (CN-1) and the Interface LSI (Q7) latches this 
data in sync with the STB signal.

The BUSY signal is switched ON as the data is processed. When processing is completed, the BUSY 
signal is switched OFF and an ACK signal is sent to the host to request more data.
The BUSY signal is also switched ON when the printer is not able to receive data (buffer is full, printer is 
deselected or an error condition exists).

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Summary of Contents for ML380














































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands