OKIDATA ML380, Service Manual

Page: 43 / 205

Page: 28
Service Guide ML380
Chapter 2 Principles of Operation
2.2.05 Paper-End Detection
Continuous Sheet Paper-End
When continuous sheet paper is installed, the paper moves the continuous sheet paper-end lever to A1
and the sensor is switched ON. When out of continuous sheet paper, the paper-end lever moves to
position B1 and the sensor is switched OFF indicating a paper-end condition.
Bottom Feed Paper-End
When paper is installed, it moves the bottom paper-end lever to position A2 and the sensor is switched
ON. When a paper out condition exists, the bottom paper-end lever moves to position B2 and the sensor
is switched OFF, indicating a paper-end condition.
Cut-Sheet Paper-End
When cut-sheet paper is installed, the paper moves the cut-sheet paper-end lever to position A3 and the
sensor is ON. At the end of printing, the cut-sheet paper-end lever moves to position B3 and the sensor is
switched OFF, indicating a paper-end condition.