ML7065-033 User’s Manual
Chapter 7 Commands
27
7.3.13 MLME-BEACON-NOTIFY.indication
Function: Posts a beacon
Command symbol: 0x4C
Access: MAC
No. Parameter
Type
Value
range
Description
1
BSN
U8
0x00 – 0xFF
Beacon sequence number
2 PANDescriptor
PANDescript
or value
(*)
PAN descriptor of the received
beacon
3
PendAddrSpec
B0 – B7
(Refer to IEEE 802.15.4, Section
7.2.2.1.6)
Pending address specification
4 AddrList
*
List of device addresses
5
sduLength
U8
0 – aMaxBeaconPayloadLength
Length in bytes of the beacon
payload
6 sdu
*
Byte data of the beacon payload
* For details of PANDescriptorList, refer to Section 7.3.37, “PANDescriptor Details.”
* For details of PANDescriptor and PendAddrSpec, refer to IEEE 802.15.4-2003. When the reception beacon does not
contain the pending address to be included in this indication, AddrList is omitted.
7.3.14 MLME-GET.request
Function: Acquires information about a PIB attribute
Command symbol: 0x4D
Access: MAC
No. Parameter
Type
Value
range
Description
1
PIBAttribute
U8
(*)
Identifier of the PIB attribute to be acquired
* For details of PIBAttribute, refer to Section 7.4, “MAC PIB Attribute Specifications.”
7.3.15 MLME-GET.confirm
Function: Reports the PIB attribute information acquisition results
Command symbol: 0x4E
Access: MAC
No. Parameter Type
Value
range
Description
1 Status
U8
SUCCESS or
UNSUPPORTED_ATTRIBUTE
PIB attribute information acquisition results
2 PIBAttribute
U8
(*)
Identifier of the PIB attribute that was
acquired
3
PIBAttributeValue
*
(*)
Value of the PIB attribute that was acquired
* For details of PIBAttribute, refer to Section 7.4, “MAC PIB Attribute Specifications.”
