ML7065-033 User’s Manual
Chapter 7 Commands
17
7. Commands
7.1 List of Commands
The following table shows the commands that can be entered from the SCI interface required for normal data
transmission/reception.
Command
symbol
Address
Command name
Function
Access type
0x1B
0xF000
-0xF001
RST_CTL0
Reset control (enable setting)
Config
0x1C
0xF002
-0xF003
RST_CTL1
Reset control (software reset)
Config
0x1D
0xF004
-0xF005
CLK_CTL0
Clock control (stop/execute)
Config
0x1E
0xF006
-0xF007
CLK_CTL1
Clock control (divide ratio of an external clock )
Config
0x40
MCPS_DATA.request
Requests the transfer of MSDU
MAC
0x41
MCPS_DATA.confirm
Reports the results of MSDU transfer
MAC
0x42
MCPS_DATA.indication
Posts the transfer of MSDU
MAC
0x43
MCPS_PURGE.request
Makes a request to purge MSDU
MAC
0x44
MCPS_PURGE.confirm
Reports the MSDU purge results
MAC
0x45
MLME_ASSOSIATE.request
Requests an association with a coordinator
MAC
0x46
MLME_ASSOSIATE.confirm
Reports the results of association
MAC
0x47
MLME_ASSOSIATE.indication
Posts the reception of an association request command
MAC
0x48
MLME_ASSOSIATE.responce
Makes a response to the MLME-ASSOCIATE.indication
primitive
MAC
0x49
MLME_DISASSOSIATE.request
Requests a disassociation
MAC
0x4A
MLME_DISASSOSIATE.confirm
Reports the results of disassociation
MAC
0x4B
MLME_DISASSOSIATE.indication
Posts the reception of an disassociation request command
MAC
0x4C
MLME_BEACON_NOTIFY.indication
Posts a beacon
MAC
0x4D
MLME_GET.request
Acquires information about a PIB attribute
MAC
0x4E
MLME_GET.confirm
Reports the PIB attribute information acquisition results
MAC
0x4F
MLME_GTS.request
Makes a request to allocate or deallocate a GTS
MAC
0x50
MLME_GTS.confirm
Reports the GTS allocation/deallocation request results
MAC
0x51
MLME_GTS.indication
Gives notice that a GTS has been allocated or deallocated
MAC
0x52
MLME_ORPHAN.indication
Posts the presence of an orphaned device
MAC
0x53
MLME_ORPHAN.responce
Makes a response to the MLME-ORPHAN.indication primitive
MAC
0x54
MLME_RESET.request
Requests a reset operation
MAC
0x55
MLME_RESET.confirm
Reports the results of the reset operation
MAC
0x56
MLME_RX_ENABLE.request
Requests that RX is enabled for a specific period of time
MAC
0x57
MLME_RX_ENABLE.confirm
Reports the results of the RX enable request
MAC
0x58
MLME_SCAN.request
Performs a channel scan over a given list of channels
MAC
0x59
MLME_SCAN.confirm
Reports the results of the scan request
MAC
0x5A
MLME_COMM_STATUS.indication
Posts the communication results
MAC
0x5B
MLME_SET.request
Sets PIB attribute information
MAC
0x5C
MLME_SET.confirm
Reports the results of the attempt to set PIB attribute
information
MAC
0x5D
MLME_START.request
Makes a request to start using a new superframe
configuration
MAC
0x5E
MLME_START.confirm
Reports the results of the attempt to start using a new
superframe configuration
MAC
0x5F
MLME_SYNC.request
Requests to synchronize with the coordinator
MAC
0x60
MLME_SYNC_LOSS.indication
Gives notice that synchronization with the coordinator has
been lost
MAC
0x61
MLME_POLL.request
Makes a request to poll the coordinator for data
MAC
0x62
MLME_POLL.confirm
Reports the results of a request to poll the coordinator for
data
MAC
0xFF
MLME-PROTOCOL-ERROR.indication
MAC protocol error indication
MAC
