Oki ML7065-033, User Manual

Page: 40 / 78

ML7065-033 User’s Manual
Chapter 7 Commands
34
7.3.31 MLME-START.confirm
Function: Reports the results of the attempt to start using a new superframe configuration
Command symbol: 0x5E
Access: MAC
No. Parameter Type Value range Description
1 Status U8
SUCCESS,
NO_SHORT_ADDRESS,
UNAVAILABLE_KEY,
FRAME_TOO_LONG,
FAILED_SECURITY_CHECK,
INVALID_PARAMETER
Status indicating the results of the attempt
to start using a new superframe
configuration
7.3.32 MLME-SYNC.request
Function: Requests to synchronize with the coordinator
Command symbol: 0x5F
Access: MAC
No. Parameter Type Value range Description
1 LogicalChannel U8
Selected from among the
available channels that PHY
supports
Logical channel to be used for synchronization
TrackBeacon B0 TRUE or FALSE TRUE if TrackBeacon is used, or FALSE if not.
2
Pad B1 – B7
 
* To make a SYNC request, the BeaconOrder of the PIBAttribute parameter must be set.
7.3.33 MLME-SYNC-LOSS.indication
Function: Gives notice that synchronization with the coordinator has been lost
Command symbol: 0x60
Access: MAC
No. Parameter Type Value range Description
1 LossReason U8
PAN_ID_CONFLICT,
REALIGNMENT,
BEACON_LOST
Cause of the synchronization loss
7.3.34 MLME-POLL.request
Function: Makes a request to poll the coordinator for data
Command symbol: 0x61
Access: MAC
No. Parameter Type Value range Description
1 CoordAddrMode U8 0x02 – 0x03
Addressing mode of the coordinator to which
the poll is intended
0x02: 16-bit short address
0x03: 64-bit extended address
2 CoordPANId[0]
3 CoordPANId[1]
U16 0x0000 – 0xFFFE
PAN identifier of the coordinator to which the
poll is intended
4 CoordAddress *
(Depends on the value of
CoordAddrMode) Device address of the coordinator to which the
poll is intended
SecurityEnable B0 TRUE or FALSE TRUE if security is enabled, or FALSE if not
5
Pad B1 – B7
 