ML7065-033 User’s Manual
Chapter 7 Commands
28
7.3.16 MLME-GTS.request
Function: Makes a request to allocate or deallocate a GTS
Command symbol: 0x4F
Access: MAC
No. Parameter Type
Value
range
Description
1
GTSCharacteristics B0 – B7
(Refer to IEEE 802.15.4, Section
7.3.3.1.2)
Bit stream indicating the
characteristics of the GTS
SecurityEnable
B0
TRUE or FALSE
TRUE if security is enabled, or
FALSE if not
2
Pad
B1 – B7
* This primitive is not supported.
7.3.17 MLME-GTS.confirm
Function: Reports the GTS allocation/deallocation request results
Command symbol: 0x50
Access: MAC
No. Parameter Type
Value
range
Description
1
GTSCharacteristics B0 – B7
(Refer to IEEE 802.15.4, Section
7.3.3.1.2)
Bit stream indicating the
characteristics of the GTS
2 Status
U8
SUCCESS,
DENIED,
NO_SHORT_ADDRESS,
CHANNEL_ACCESS_FAILURE,
NO_ACK,
NO_DATA,
UNAVAILABLE_KEY,
FAILED_SECURITY_CHECK,
INVALID_PARAMETER
Status indicating the results of the
GTS request
* This primitive is not supported.
7.3.18 MLME-GTS.indication
Function: Gives notice that a GTS has been allocated or deallocated
Command symbol: 0x51
Access: MAC
No. Parameter Type
Value
range
Description
1
DevAddress
U16
0x0000 – 0xFFFD
Short address of the device that
has been allocated or deallocated
the GTS
2
GTSCharacteristics B0 – B7
(Refer to IEEE 802.15.4, Section
7.3.3.1.2)
Bit stream indicating the
characteristics of the GTS
SecurityUse
B0
TRUE or FALSE
Whether security is applied or not
ACLEntry
B1 – B4 0x00 – 0x08
Value of MacSecurityMode for
ACL entry
3
Pad
B5 – B7
* This primitive is not supported.
