Oki MC770 series, Maintenance Manual

Page: 419 / 487

45584901TH Rev.1
11-116 /
Oki Data CONFIDENTIAL
05/08 Mode Element
Sub
element
Item Subitem Code Sub-
code
Details
Default
value
Acceptable
value
RAM Contents
Proce-
dure
08 Setting
Mode
System User
interface
8724 Display setting of
Edit From Address
button for Scan to
email 1 0-1 SYS 0: Not displayed (From Address cannot be edited)
1: Displayed (From Address can be edited) 1
08 Setting
Mode
System User
interface
8725 Display setting
of [SETTING]->
CHANGE
LANGUAGE button
1 0-1 SYS Sets whether the [CHANGE LANGUAGE] button
accessed from [SETTING] button is displayed or not.
Use this code to prohibit users from changing the
language displayed on the control panel. Administrators
can change the language.
0: Not displayed
1: Displayed
1
08 Setting
Mode
System General 8726 Job deletion on the
Job Status screen 0 0-1 SYS Use this code to enable the job deletion on the [Job
Status] screen. When "3: High level" is set for code 08-
8911, be sure to disable this setting.
0: Disabled
1: Enabled
1
08 Setting
Mode
System User
interface
Card reading device 8727 Display of dedicated
screen for card
authentication 0 0-1 SYS Switches whether the message to hold a card over the
card reader is displayed on the login screen when the
card authentication is enabled.
0: Disabled
1: Enabled 1
08 Setting
Mode
System User
interface
Display setting 8738 E-mail address
direct input button 1 0-1 SYS Switches the display setting of the [INPUT @] button.
0: Not displayed
1: Displayed 1
08 Setting
Mode
System User
interface
Display setting 8744 Switchover of pop-
up display during
scanning 1 0-1 SYS Switches the pop-up display during scanning
0: Not displayed
1: Displayed 1
08 Setting
Mode
System User
interface
8745 Enable/Disable
setting of EWB
history
0 0-1 SYS Sets whether part of the cookie, password, and form
data of user who logs in to EWB is saved or not.
0: Disabled
1: Enabled
1
08 Setting
Mode
System Network 8746 Port number setting
of destination 10 for
sending trap 162 1-65535 NIC Sets the port number of destination 10 for sending
SNMP trap. If the port is used when using the real time
log notification function, change the port number.
12
08 Setting
Mode
System User
interface
8748 Input of department
code at user
authentication 0 0-1 SYS 0: Not required
1: Required
1
08 Setting
Mode
System Network 8749 User authentication
by logon information
to domain (external
authentication) 0 0-1 SYS 0: Disabled
1: Enabled 1