45584901TH Rev.1
8-11 /
Oki Data CONFIDENTIAL
(9) Press the [POWER] button to shut down the equipment, and then remove the USB
device.
(10) Perform the initialization of the updating data.
• Press the [POWER] button while simultaneously holding down the [0] and [8]
buttons.
• Key in “9030”, and then press the [START] button.
• Press the [INITIALIZE] button.
[B] Confirmation of the updated data
After the updating is completed, check each data version in the Setting Mode (08) to
confirm that the data were overwritten properly.
P. 8-28 “8.6 Confirmation of the updated data”
[C] adjustment
Perform the adjustment of the equipment.
• Density correction (05-4905):
P. 4-2 “4.1.2 Performing density correction”
• Automatic gamma adjustment <PPC> (05-7869) (using [4][FAX] test pattern):
P. 4-5 “4.2.1 Automatic gamma adjustment”
• Automatic gamma adjustment < PRT > (05-8008) (using [70][FAX] test pattern):
P. 4-7 “4.3.1 Automatic gamma adjustment”
• Automatic gamma adjustment <PRT> (05-8009) (using [230][FAX] test pattern):
P. 4-7 “4.3.1 Automatic gamma adjustment”
[D] Display during the update
Update is performed in parallel as shown in the transition diagram below.
Update Completed
1. SYSTEM
FIRMWARE
(OS Data)
2. ENGINE
FIRMWARE
3.SCANNER
FIRMWARE
4. SYSTEM
SOFTWARE
(HD Data)
Item Selection Screen for Update
[
System firmware
]
[Engine firmware]
[Scanner firmware]
[System software]
