Advanced network settings > 69
C
ONFIGURING
LDAP
SERVER
1.
Access the machine’s web page and log in as the administrator.
2.
Select
Admin Setup
.
3.
Select
Network > LDAP
.
4.
Enter the domain name or IP address of the LDAP server in
LDAP Server
.
5.
Enter the port number of the LDAP server in
Port Number
.
6.
Specify a value for time-out to wait for the search results in
Timeout
.
7.
Specify a value for the maximum entry of the search results in
Max. Entries
.
8.
Specify a BaseDN to access the LDAP server in
Search Root
.
9.
Enter attribute names to be searched for as the user name in
User Name
.
Be sure to specify a value for
Name 1
.
10.
Enter attribute name to be searched for as the E-mail address in
Mail Address
.
11.
If necessary, specify a search condition in
Additional Filter
.
12.
Select the authentication method you want in
Method
.
>
When you select
Anonymous
, user authentication using LDAP fails. You need to
select
Simple
,
Digest-MD5
or
Secure Protocol
if you configure the LDAP
server for user authentication.
>
When you select
Digest-MD5
, you need to configure the DNS server setting.
>
When you select
Secure Protocol
, you need to configure the DNS server, the
secure protocol settings and complete
Time Setup
.
13.
If you do not select
Anonymous
, specify the user ID and password to log
in to the LDAP server.
14.
Select a value in
Encryption
.
15.
Click
Submit
.
The network system reboots to enable the new settings.
C
ONFIGURING
SECURE
PROTOCOLS
Authentication using the Kerberos server is available when you access the LDAP server. Be
sure to complete
Time Setup
and DNS server settings to use the secure protocol.
1.
Access the machine’s web page and log in as the administrator.
2.
Select
Admin Setup
.
3.
Select
Network > Secure Protocol Server
.
4.
Enter a realm name in
Domain
.
5.
Click
Submit
.
The network system reboots to enable the new settings.
NOTE
For details on the LDAP server and encryption settings to be specified, refer to
your network administrator.
