Advanced network settings > 64
E
RROR
NOTIFICATION
BY
E-
(E-
ALERT
)
You can set the machine to send an error notification E-mail when an error happens. You
can set when to be notified:
>
On a regular basis
>
Only when an error occurs
Configuring your machine
You can configure the settings for E-mail alert using the web page.
1.
Access the machine’s web page and log in as the administrator.
2.
Select
Admin Setup
.
3.
Select
Network > E-mail > Alert Settings > E-mail Send Settings
.
4.
Follow the on-screen instructions to specify the detailed settings.
5.
Select
Set detail of the SMTP Protocol.
.
6.
If necessary, you can configure
Security settings
,
Configure attached
information
, and
Others
.
7.
Click
Submit
.
The network system reboots to enable the new settings.
Regular alert
1.
Access the machine’s web page and log in as the administrator.
2.
Select
Admin Setup
.
3.
Select
Network > E-mail > Alert Settings > Alert Settings
.
4.
Enter an E-mail address to receive the alerts.
5.
Click
Setting
for the specified address.
Copy
is useful when you want to apply the alert conditions to another address.
6.
Choose
Periodically
.
7.
Click
To STEP2
.
8.
Follow the on-screen instructions to specify the detailed settings.
9.
Click
OK
.
10.
Click
View a summary of current configuration
to check the current settings,
and then click
X
to close the window.
You can also check the current settings of up to two addresses on the main window.
Select the desired addresses from the list box.
11.
Click
Submit
.
NOTE
When you specify a domain name in
SMTP Server
, configure the DNS server
in the
TCP/IP
setting.
You need to set the mail server to allow the machine to send an E-mail. For
details on the mail server setting, refer to your network administrator.
