Advanced network settings > 67
C
HECKING
IP
V
6
ADDRESS
The IPv6 address is automatically assigned.
1.
Select
View Information
.
2.
Select
Network > Network Information
.
U
SING
IEEE802.1X
Your machine supports the IEEE802.1X authentication.
Be sure to set up your machine and computer in advance before performing the following
procedure.
C
ONFIGURING
YOUR
MACHINE
FOR
IEEE802.1X
Using PEAP
1.
Access the machine’s web page and log in as the administrator.
2.
Select
Admin Setup
.
3.
Select
Network > IEEE802.1X
.
4.
Select
Enable
for
IEEE802.1X
.
5.
Select
PEAP
for
EAP Type
.
6.
Enter a user name in
EAP User
.
7.
Enter a password in
EAP Password
.
8.
Select
Authenticate Server
and then click
Import
.
9.
Enter the file name of the CA certificate and then click
OK
.
Specify the certificate issued by the certificate authority from which the RADIUS
server got it. A PEM, DER, and PKCS#7 file can be imported.
10.
Click
Submit
.
The network system reboots to enable the new settings.
11.
When the standby screen appears on the machine, turn off the machine.
12.
Go to
“Connecting your machine to authentication switch” on page 68
NOTE
When the global address is displayed with only “0”, it may be an error due to
the router you use.
You can also check the IPv6 address in the network report from the machine
by pressing the
SETTING
key and then selecting
Reports > System
>
Network Information
.
NOTE
For details on the initial setup and the IP address, refer to
