Configuring the Scan to Computer and Remote Scan > 30
4.
Start image capture on your computer.
5.
Select the machine from the list at the left to the image capture screen.
6.
Click the
Scan
.
Scanning will start.
7.
From the
Image Capture
, select
Close Image Capture
.
Change settings
You can adjust the document scan by changing the current driver settings.
The following explains each item to set.
Display the detailed information
You can adjust the document scanning in details.
1.
Follow steps 1 to 5 of “Start to read” section.
2.
Click on
Show Details
.
3.
Change the settings as required.
4.
Click
Scan
to scan the document.
U
SING
A
CT
K
EY
S
OFTWARE
Using the ActKey, you can start a scan job in specified settings with a click a button.
Installing the Software
1.
Insert the included “Software DVD-ROM” into a computer.
2.
When
AutoPlay
is displayed, click
Run Setup.exe
.
If the
User Account Control
dialog box is displayed, click
Yes
.
3.
Follow the instructions and proceed to
1. Install Optional Software
screen.
4.
Click
Custom Install
.
5.
Click
Separate Install
.
6.
Select
ActKey
.
7.
Install the software as instructed.
8.
Click
Finish
.
Starting the Software
1.
Click
Start
to select
All Programs
>
Okidata
>
ActKey
>
ActKey
.
MEMO
ActKey does not support Mac OS X.
When ActKey is installed, Network Configuration is also installed
simultaneously. For Network Configuration, refer to
REFERENCE
For details on how to start a scan job, refer to the User's Guide.
