Advanced network settings > 65
The network system reboots to enable the new settings.
Alert when an error occurs
1.
Perform steps
to
5
in “Regular alert”.
2.
Choose
Upon occurrence of an event
.
3.
Click
To STEP2
.
4.
Follow the on-screen instructions to specify the detailed settings.
Specify the time lag between when an error occurs and when the alert is sent.
If you specify a longer time, only continuing errors are notified.
5.
Click
OK
.
6.
Click
View a summary of current configuration
to check the current settings,
and then click
X
to close the window.
You can also check the current settings of up to two addresses on the main window.
Select the desired addresses from the list box.
7.
Click
Submit
.
The network system reboots to enable the new settings.
U
SING
SNMP
V
3
The SNMPv3 manager supporting SNMPv3 encrypts the management of the machine by
SNMP.
1.
Access the machine’s web page and log in as the administrator.
2.
Select
Admin Setup
.
3.
Select
Network > SNMP > Setting
.
4.
Follow the on-screen instructions to specify the detailed settings.
5.
Click
Submit
.
The network system reboots to enable the new settings.
NOTE
If there is no error specified, the alert E-mail in not sent.
NOTE
You can check and change the machine settings by a commercially available
SNMP manager. For the MIB of the machine,
MIB definitions files
are stored
in
DVD MISC > MIB files
.
