43967002TH Rev.1
263 /
Oki Data CONFIDENTIAL
5. Maintenance Menu
Item
Adjustment contents
Maintenance
utilities,
Operation
manual, Item
number
Operation on
Operator panel
(Item numbers
correspond to those
of Maintenance
manual.)
17 Destination/
PnP
information
setting
Printer (CU) destination, device ID, USB ID
setting/check
Item 2.4.1.2.9
Item 5.4.3
18 Send to File
function
Send to the Specified file
Item 2.4.1.2.12
19 Consumable
item counter
display
Consumable item counter current value
check
Item 2.4.1.3.1
Item 5.1 ENG
STATUS PRINT
20 Menu setup
value check
Setup value of the respective menus that
are set in printer (CU) is displayed.
Item 2.4.1.3.2
Menu map print
(Refer to User’s
Manual.)
21 Printer
information
check
Printer Mac address and various F/W
versions are checked.
Item 2.4.1.3.3
Menu map print
(Refer to User’s
Manual.)
22 Installed
CPU/memory
value check
Information of CPU and memory that are
installed in printer (CU) are checked.
Item 2.4.1.3.4
Menu map print
(Refer to User’s
Manual.)
23 Test print
Local print function execution and specifying
File send
Adjustment purpose: Operation check of
printer standalone and sending download
file
Item 2.4.1.4.1
Each local print
(Refer to System
Specifications.)
24 Switch scan
test function
Execution of switch scan test
Adjustment objective: Operation check of
the respective sensors
Item 2.4.1.5.1 Use of this menu item
is prohibited.
25 Motor clutch
test function
Execution of motor clutch test
Adjustment objective: Operation check of
the respective motors and clutches.
Item 2.4.1.5.2 Use of this menu item
is prohibited.
26 Color
registration
correction
test function
Execution of color registration error
correction
Item 2.4.1.5.3 Use of this menu item
is prohibited.
Item
Adjustment contents
Maintenance
utilities,
Operation
manual, Item
number
Operation on
Operator panel
(Item numbers
correspond to those
of Maintenance
manual.)
27 Density
correction
function test
Execution of density correction test
Item 2.4.1.5.4 Use of this menu item
is prohibited.
28 Automatic
density
correction
control
parameter
setting
[Do not use]
Setting the automatic density correction
control parameter
[Do not use]
[Do not use]
29 Counter
display
Checking reading of the consumable items
counter, consumables continue counter and
waste toner counter.
Item 2.4.1.5.6 Use of this menu item
is prohibited.
30 Local
parameter
setup/display
function
Factory mode or Shipping mode switching
FUSE status check
Item 2.4.1.5.7 Use of this menu item
is prohibited.
31 Engine
parameter
setup
function
Setting values of the engine parameter
items
Item 2.4.1.5.8 Use of this menu item
is prohibited.
32 Media
transport
parameter
setup
function
Media transport parameter setup value
setting 2
Item 4.1.5.9 Use of this menu item
is prohibited.
Note!
[Do not use] Do not operate and do not set the item. There is danger of
operating abnormally.
