manualshive.com logo in svg

Oki IP-5630, User Manual, Page: 76 / 265

Share
Download
Oki IP-5630 User Manual Download Page 76

76

Adjustment

4

 

ADJUST  

   

2

MEDIA ADVANCE 

 

              

  

Press the 

OK

 button.

5

 

 

>MEDIA ADVANCE 

2

MEDIA ADVANCE AUTO 

 

              

  

, 

Press the 

Up

 and 

Down

 buttons to select 

MEDIA ADVANCE AUTO

.

6

 

 

>MEDIA ADVANCE 

2

MEDIA ADVANCE AUTO 

 

              

  

Press the 

OK

 button.

7

 

 

>MEDIA ADVANCE 
  PRINT? 

 

              

  

Press the 

OK

 button to execute media 

advance adjustment.

 

 

>MEDIA ADVANCE
  EXECUTING...

The printer prints the media advance adjustment pattern 
and check the result with its sensors.  
After the results have been checked, the printer 
automatically set the media advance adjustment value. The 
procedure is complete.

During this procedure, the printer prints and checks patterns similar to those shown below.  
 

8

If the print quality has not been improved, perform manual print adjustment. 

  

Summary of Contents for IP-5630










































































































































































































































































Reviews:

No comments