Home
/
Oki
/
IP-5630
/
User Manual

Oki IP-5630, User Manual, Page: 260 / 265

Share

245 pages before
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265

Page: 260 / 265

Oki IP-5630 User Manual Download Page 260

260

Appendix

Consumables

Ink cartridge

One package contains one ink cartridge.

Type

Ink color

Quantity

IP5-221

Y (yellow)

500 ml

IP5-222

M (magenta)

500 ml

IP5-223

C (cyan)

500 ml

IP5-224

K (black)

500 ml

IP5-225

Lc (light cyan)

500 ml

IP5-226

Lm (light magenta)

500 ml

The type number may vary depending on the region. Contact your dealer for more information.

WARNING

The ink is combustible. Keep the ink away from open flames, sparks, or other sources of ignition.

Do not swallow ink and avoid contact with the eyes to prevent breathing trouble or visual impairment. If ink gets into your eyes,
wash it off with clean water and consult a doctor. If it is swallowed, do not try to induce vomiting, but consult a doctor.

CAUTION

Always use OKI Data specified ink cartridges. Failure to use the recommended ink cartridges may lead to a deterioration of the print
quality or a printer malfunction. This may also invalidate your warranty.

The ink validity period is 18 months from the date of production.

Do not shake the ink cartridges before use.

Set the ink cartridges in their cartridge holders and install cartridges in all the six slots. When removing a cartridge, always replace
it with a new one.

Waste ink bottle

Type

Content

Quantity

IP5-299

Waste ink bottle

1 piece

WARNING

The waste ink is combustible. Keep the waste ink bottle containing the waste ink away from open flames, sparks, or other sources
of ignition.

Do not swallow ink and avoid contact with the eyes to prevent breathing trouble or visual impairment. If ink gets into your eyes,
wash it off with clean water and consult a doctor. If it is swallowed, do not try to induce vomiting, but consult a doctor.

CAUTION

A waste ink bottle must always be installed. When it is removed to dispose of waste ink, another empty waste ink bottle must be
installed.

«
...
258
259
260
261
262
...
»

Summary of Contents for IP-5630










































































































































































































































































Reviews:

No comments