Home
/
Oki
/
IP-5630
/
User Manual

Oki IP-5630, User Manual, Page: 127 / 265

Share

Page: 127 / 265

Oki IP-5630 User Manual Download Page 127

127

Maintenance

5

>>SET PH FOR CHECK

OK?

Press the

OK

button.

6

CARRIAGE IS MOVING
PLEASE WAIT

Carriage stops moving.

The carriage moves to the maintenance area.

The printer issues a warning beep.

When the carriage moves, the printer issues a
warning beep.
To disable the warning beep, see the

7

OPEN COVERS AND
CHECK PRINT HEADS

Open the front cover, and then the
maintenance area cover.

8

Head guard

Area to clean

Area to clean

Dip the cleaning swab in the cap cleaning
liquid and remove the dirt on the right and
left head guards of the carriage. Visually
check the result and leave it for few minutes.

Note

Do not dip a cleaning roller swab once used in the cap cleaning liquid bottle.The cap cleaning liquid will get dirty.

9

After wiping the head guards with a soft
cloth, close the maintenance area cover and
the front cover.

Note

Do not expose the print heads for an unnecessarily long time when taking them out of the capping unit. The print
heads may dry and cause malfunction.

«
...
125
126
127
128
129
...
»

Summary of Contents for IP-5630










































































































































































































































































Reviews:

No comments