manualshive.com logo in svg

Oki IP-5630, User Manual, Page: 226 / 265

Share
Download
Oki IP-5630 User Manual Download Page 226

226

Troubleshooting

Clear missing dots (nozzle clogging) 

If the missing dots still appear after the daily maintenance and after setting NOZZLE MAP, perform the operation 
below. 
 

Strong cleaning

Perform the strong cleaning when missing dots still appear after the 
normal cleaning.

  

Perform the

 

NOZZLE PRINT

Fill the cap with ink

To clear the nozzle clogging, fill the cap with ink and moisten the print 
head nozzle surface with ink. After this operation, leave the printer for 1 to 
2 hours.

  

Perform the

 

NOZZLE PRINT

Fill the cap with sheet mount 
cleaning liquid

In order to clear the nozzle clogging, fill the cap with sheet mount 
cleaning liquid to immerse the print heads (nozzle surface) in that liquid. 
After filling the cap, leave the printer one night (12 to 18 hours).
Then perform the strong cleaning.

  

Perform the

 

NOZZLE PRINT

Perform sheet mount cleaning

Clean the print heads surfaces with sheet mount cleaning(   

page 

120

). 

 
 

Strong cleaning 

1

 

 

PRINTER READY 
01: PAPER / 1626mm

 

                 

  

Press the 

PH.RECOVERY

 button. 

You can perform PH recovery in the following situations.  
- When the printer is idle online  
- When the printer is online   
- During printing  
- When the printer is in pause

2

 

 

PH RECOVERY  

   

2

NORMAL 

 

                 

  

Press the 

Down

 button to select 

STRONG

.

3

 

 

PH RECOVERY  

   

2

STRONG 

                 

  

Press the 

OK

 button.

Summary of Contents for IP-5630










































































































































































































































































Reviews:

No comments