Oki IP-5630, User Manual, Page: 112 / 265

112
Maintenance
F Cap cleaning (capping unit cleaning, cleaning)
Select START MAINTENANCE on the panel and follow the instructions to perform both capping unit cleaning and
cleaning at the same time. You may also perform cleaning independently in this manner.
Performing wiper blades check, capping unit cleaning and cleaning at the same time
CAUTION
To prevent the ink from drying inside the print head’s nozzles:
- Do not leave the printer with the carriage detached from the capping unit.
- Complete the capping unit cleaning operation and cap the print heads within 5 minutes.
1
PRINTER READY
01: PAPER / 1626mm
Press the MAINTENANCE button.
2
MAINTENANCE
2
START MAINTENANCE
Press the OK button.
3
>START MAINTENANCE
2 OK?
Press the OK button to start the operation.
To cancel the operation, press the
CANCEL
button.
4
1ST WIPING OPERATION
PLEASE WAIT
1:00
Carriage stops moving.
After the wiping of the print heads finishes, the carriage
moves to the maintenance area.
The printer issues a warning beep.
š
When the carriage moves, the printer issues a
warning beep.
To disable the warning beep, see the
page
187
.
5
OPEN COVERS, CLEAN
CAPS AND CHECK WIPER
After the carriage has moved to the
maintenance area, open the front cover, and
then the capping unit cover.
Weekly maintenance