manualshive.com logo in svg

Oki IP-5630, User Manual, Page: 208 / 265

Share
Download
Oki IP-5630 User Manual Download Page 208

208

Advanced operations

7

Insert the tail section fixing plate hooks into 
the ink cartridge tail section holes to attach 
it.

 Note

 

‹

Do not apply an excessive force as the ink cartridge 
holes may be deformed.

8

Hook the tail section fixing plate to the 
cartridge holder claws.

9

Remove the board protective sheet.

 Note

 

‹

Be sure to remove the board protective sheet. Installing 
the ink cartridge to the printer without removing the 
board protective sheet may cause a malfunction.

10

Insert the reloadable ink cartridge into the 
slot.

 Notes

 

‹

Check that the color on the ink cartridge tail section 
label and the color on the ink box label are the same.

 

‹

Do not push strongly the tail section fixing plate toward 
the inside.

Summary of Contents for IP-5630










































































































































































































































































Reviews:

No comments