1
1-17 Managing color on the Fiery
ES3640e MFP Color Guide - 17
You can specify settings for the following options by selecting print
options when you send a job to the Fiery. Some can also be set as
defaults by the administrator during Fiery Setup or using Color-
Wise Pro Tools. Settings specified using print options override the
defaults. Some options are only available with Spot-On, which is
supplied with ES3640e MFP GA only.
Fiery color print option
What it does
Brightness
85% Lightest to 115% Darkest
Performs a color adjustment on all color channels to make
the printed output lighter or darker.
CMYK Simulation Method
Quick/Full (Source GCR)/Full
(Output GCR)
(Default set at Setup or with
ColorWise Pro Tools)
Quick simulation applies one-dimensional transfer curves
that adjust output density only. The Full simulations apply
colorimetric transformations that adjust hue as well as
output density (see
CMYK Simulation Profile
SWOP-Coated (EFI)/DIC (EFI)/
Euroscale (EFI)/None
(Default set at Setup or in
ColorWise Pro Tools)
Adjusts CMYK color data to simulate an offset press
standard or a custom color gamut defined at your site.
Choosing None bypasses simulation (see
Color Mode (Mac OS)
CMYK/Grayscale
or
Print Mode (Windows)
Standard Color/Expert
Color/Grayscale
Specifies the output color space of the job. Select CMYK,
Standard Color, or Expert Color for a full-color document.
(Other) Gamma
1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/2
.6/2.8/3.0
(Default set with ColorWise Pro
Tools)
Applies the specified gamma value to the RGB source space
definition (see
). To use this print option, you
must choose Other as the RGB Source Profile setting.
Summary of Contents for ES3640eMFP
Page 1: ......
