Oki C9850hdn, Advanced User'S Manual

Page: 130 / 162

Appendix B – Menu system (printer unit) > 130
Print Position
Adjust X Adjust 0.00
+0.25 –
+2.00
-2.00 – -0.25
mm
0.00
+0.01 –
+0.08
-0.08 – -0.01
in Adjusts the position of the whole
printing image (0.25 mm, 0.01 in
interval) perpendicular to the
direction of paper movement (i.e.
horizontally).
Y Adjust 0.00
+0.25 –
+2.00
-2.00 – -0.25
mm
0.00
+0.01 –
+0.08
-0.08 – -0.01
in Adjusts the position of the whole
printing image (0.25 mm, 0.01 in
interval) parallel to the direction of
paper movement (i.e. vertically).
Duplex X
Adjust 0.00
+0.25 –
+2.00
-2.00 – -0.25
mm
0.00
+0.01 –
+0.08
-0.08 –
-0.01in During the flip-side printing of duplex
printing, adjusts the location of the
whole printing image (0.25 mm,
0.01in interval) perpendicular to the
direction of paper movement (i.e.
horizontally).
Duplex Y
Adjust 0.00
+0.25 –
+2.00 -2.00
– -0.25 mm
0.00
+0.01 –
+0.08
-0.08 – -0.01
in During the flip-side printing of duplex
printing, adjusts the location of the
whole printing image (0.25 mm, 0.01
in interval) parallel to the direction of
paper movement (i.e. vertically).
xxxx
Darkness 0
+1 – +3
-4 – -1 Adjusts the xxxx engine density
where xxxx is one of Cyan, Magenta,
Yellow, Black. Darkest value is +3.
xxxx Reg .
Adjust
0
+1 – +3
-3 – -1 Makes fine adjustment to image
registration in xxxx against Black in
the horizontal direction, where xxxx is
one of Cyan, Magenta, Yellow.
If the paper movement direction is
upward, a value set on the plus side,
means the image relatively moves
downward.
Paper Bk
Setting 0
+1 – +2
-2 – -1 Used for micro adjustment when very
visible faded print results or light
specks (or streaks) result when
printing in Plain Paper/Black setting.
Decrease the value if light specks (or
streaks) or snow flake like printing
results in high density print areas.
ITEM VALUE DESCRIPTION