Scanning – e-mail send mode > 87
7.
Place the document to be scanned on the scanner unit glass or ADF.
8.
Press the START button.
C
ONFIRMING
E
-
TRANSMISSION
You can check the transmission status of e-mails from:
>
Job Log screen: Press the Job Log button to display this screen.
>
E-mail Log Report: To print this report, press the SETUP button on the scanner unit
control panel then press the Report button followed by the Print button associated
with E-mail Log.
NOTE
If you specify Auto for Original Size, the MFP automatically selects the paper
size to match the original document. However, depending on the document
conditions (for example, if the background density is high), document sizes
may not be detected automatically. In this case, specify the document size
manually.
