Print options – PostScript > 69
C
REEP
A
DJUSTMENT
Creep occurs in booklets that contain a large number of pages or are printed on heavy
media. As the sheets are folded to create separate page areas, each fold causes a small
incremental shift in the location of the edge of each page relative to others.
Use this option to adjust images that may shift from the center of the sheet in booklet jobs.
Off: Select this setting to print booklet jobs without any adjustment.
Plain: Select this setting when printing booklets that contain a large number of pages.
Thick: Select this setting when printing booklets on heavy media.
I
MAGE
S
HIFT
Image Shift allows you to specify how much the image on each page should be shifted
relative to the X (horizontal) and Y (vertical) axis. Moving the job content in this manner
enables you to allow for various finishing options, such as stapling and binding. Image Shift
prevents the image from being clipped.
To define image shift for a print job:
1.
In the printer driver, enable the Image Shift check-box, and then click the Image
Shift Options.
NOTE
The Creep Adjustment option is only available when Booklet Maker is selected.
It is not applicable to the Gang-up Booklet Maker settings.
NOTE
If you select Thick, you must also specify heavy paper from the Media Type
pull-down menu; otherwise, your job will print on plain paper.
NOTE
>
The Image Shift option is available in Windows printer drivers or
Command WorkStation.
>
This option is effective only for jobs in which Layout is set to 1-up.
