Oilon ESi 6-17, Installation And Operation Manual

Page: 14 / 80

The unit’s installation site should have a floor drain. The site’s floor should be inclined
so that any runoff from the unit leads towards the drain.
Place the unit on a stable, steady base that can carry the entire weight of the heat
pump and a full storage tank, see the tank volume in the technical data. Mount the unit
securely in a vertical position onto its own leveling feet. Level the machine using the
machine’s leveling feet.
Fire insulation is not required.
Space requirements
The minimum height of the heat pump is approximately 145 cm with the adjustable feet
installed. Note that transportation supports add approximately 8 cm to the full height of
the unit.
At the back of the unit, there are connection hoses that extend 5–20 cm above the
unit’s top cover.
● Leave at least 80 cm of clearance in front of the unit.
● Leave at least 50 cm of clearance above the unit for the necessary connections.
E series space requirements ver. 1
Pos. Item
GSHP Ground source heat pump
ST Storage tank
Model A B C O X F Y V
ESi 400/50* 50 50 700* 2300* 700 1500* 200
EMi 400/50* 50 50 700* 3200* 700 2000* 200
ELi 400/50* 50 50 700* 3600** 700 2500* 200
* 400 mm reserved for brine circuit pipes (if required).
** The minimum width depends on the storage tank selected.
2.4 Removing the packaging and inspecting the contents
1. Remove the plastic wrapping and corner padding from around the product.
2. Check that the heat pump has not suffered any damage during transit. If you detect
any damage,
notify the carrier immediately.
It is advisable to take photos of the
damage.
3. Check the delivery contents immediately. If there are accessories missing, notify
the dealer within 5 days of delivery.
The heat pump’s accessory package includes the following:
12 (75) M8010 2204EN