Oilon ESi 6-17, Installation And Operation Manual

Page: 34 / 80

Heating circuit timer ver. 1
Finally, the
Timer
view appears.
Timer view ver. 1
2. To schedule a temperature change for a weekday, specify a start time and end time
for the change as well as the amount with which the temperature will be changed (in
°C).
The indicators in the State column show whether a change has been scheduled
for each day. Green means that a temperature change has been scheduled for
the relevant day, and yellow that the temperature will remain at its usual level.
4.4.6 Measurements
The Measurements view can be used to monitor the heat pump’s operation based
on measurement data. The values in the view represent the heat pump’s operation in
different conditions and cannot be edited.
Measurements ver. 1
32 (75) M8010 2204EN