OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ofite.com
12
Measure - The bob is turning and measuring gel strength. The
measurement will last for the amount of time specified in “SGSM Test
Time” on the Setup screen.
“Temperature” - Temperature within the test cell. (°F or °C, depending on
the settings in the Setup screen)
“Pressure” - Pressure within the test cell. (PSI or MPa, depending on the
settings in the Setup screen)
The pressure reading is only on the High Pressure 20,000 PSI SGSM
units (#120-58).
“Current Reading” - The current gel strength measurement. This field
will show the current gel strength if the SGSM State is in “Measure” or in
“Stop”. (Units depend on the settings in the Setup screen.)
“Last Gel Strength” - The last calculated gel strength of the sample. (Units
depend on the settings in the Setup screen.)
The
Dashboard
shows graphs for both cells along with current test data.
Dual cell units only.
