background image

6

IMPORTANT SAFETY

WARNINGS

Before cleaning the appliance or carrying out maintenan-

ce, disconnect the power supply by removing the plug from 

the socket or switching off the switch.

In case of breakdown or malfunction switch off the ap-

pliance and do not attempt any repairs that must only 

be performed by an authorized service center. Always 

request original parts. Failure to comply with these in-

structions may compromise the appliance’s safety.

Never place unstable or deformed pans on the bur-

ners or on the electric hotplates as they could topple 

accidentally.

When the appliance is not being used, make sure the 

knobs are exactly in the   “  ”/“  ”/  position.

Don’t leave the hotplate on with no pans on it, as it 

would reach the temperature fast and possibly dama-

ge the appliance and your countertops.

The electric plates remain hot after using them. Be careful 

not to touch them.

Inflammable liquids, like alcohol or gasoline, must be 

kept away from the appliance.

Should you use small household appliances near the 

cooking top, please make sure that the electrical cable 

is not in contact with hot parts of the appliance.

To assure the right function of gas appliance, make 

sure that the rooms are ventilated. Check that the 

installation is carried out in accordance with the in-

structions.

16

17

18

19

20

21

22

15

23

Officine Gullo

6

Summary of Contents for ELG 90



































































Reviews: