background image

10

• 

Only qualified technicians should install the appliance. 

The technician will not be held responsible for any da-

mages caused by electrical malfunctions.

•  The hob must be installed in the appropriate inset.

•  The appliance should be used solely for cooking foods, 

excluding any other domestic or industrial uses.

•  Remove the adhesive labels from the glass on the hob.

•  Do not modify or alter the appliance.

•  Do not use the hob as a working zone.

•  The appliance must be connected and installed in com-

pliance with current local regulations.

•  Do not use extension cables for connections.

•  This appliance is not intended for use by persons (inclu-

ding children) with reduced physical, sensory or men-

tal capabilities, or lack of experience and knowledge, 

unless they have been given supervision or instruction 

concerning use of the appliance by a person respon-

sible for their safety. Children should be supervised to 

ensure that they do not play with the appliance.

•  WARNING: Accessible parts may become hot during 

use. To avoid burns young children should be kept away.

IMPORTANT SAFETY

WARNINGS

- Models with glass-ceramic zones

Read

carefully

before using

Officine Gullo

10

Summary of Contents for ELG 90



































































Reviews: