Officine Gullo ELG 90, Instructions For Installation And Use Manual

Page: 35 / 66

49
USER
For ease of intensive cleaning it is practical to dismantle the door following these in-
structions:
- open the door
- mow the hook C to the hince zone d, following the speps
Zone C
Zone D
Procedure to follow
CLEANING AND MAINTENANCE
– Door removal
1
2
3
4
50
The oven door is composed of 3 sheets of plate glass (two in some cases). The plate
glass parts may be cleaned using absorbent kitchen paper and an ordinary non-abra-
sive detergent. Do not use coarse abrasive cleaning materials or sharp metal scrapers
to clean the oven’s glass doors since they can scratch the surface and cause the glass
to shatter
The inside glass may be removed to facilitate cleaning. To do this it is necessary to di-
smantle the oven door or, alternatively, to set it in the intermediate click position.
ATTENTION! every procedure must be done whith the door removed and placed
on an adequate surface in order to not damage the door’s facade.
Unscrew the 2 screw on/the sides in the upper baton
Lift the upper glass and puul it out
Pull out the middle glass
Procedure to follow
Sequence for
removing the
glasses
CLEANING AND MAINTENANCE
– Cleaning the door and glasses
1
2
3
33
Officine Gullo