Officine Gullo ELG 90, Instructions For Installation And Use Manual

Page: 33 / 66

47
USER
Slide the meat to be cooked onto the spit, blocking it with the special forks. Place the spit
on the special supports previously inserted in the drip pan and insert it in the spit-roast
horn. Turn on the static grill with closed door function. To extract the spit together with
the drip pan pull it out just enough to allow complete extraction.
This solution has been studied to increase the orgonomics, the practica and safety when
moving baking trays in the oven. The kit includes completely extendible lateral runners,
which slide on ball bearings to facilitate the removal and positioning of the trays. The
runners are anti tip-over for better safety. It is possible to remove them to clean them or
move them as illustrated in the pictures below.
Repeat the operations backwards to repositions the grills.
turn-spit
(only on some models)
Telescopic runners
(only in certain models)
Pul down the part highlighted in
red to remove it from the oven.
Turn over the grill and place it on
a flat surface whit the telescopic
runner facing down.
To un nook the clip, loosen whit a
flathead screwdriver
INSTRUCTIONS FOR USE
48
Should the oven light not work, disconnect the appliance from the mains, remove the
lamp protection glass and replace the bulb. The new bulb must, naturally, be suitable
for use at high temperatures and has the characteristics for such use.
Losen whit a flathead screwdriver
Remove the glass cover
Pull out the light
Replace and close again
Procedure to follow
CLEANING AND MAINTENANCE
– Replacing the bulb
1
2
3
4
31
Officine Gullo