Officine Gullo ELG 90, Instructions For Installation And Use Manual

Page: 39 / 66

53
USER
ATTENTION!
Some cleaning and washing methods are recommended in order to preserve the quality of the coating.
• Allow the product to cool down at room temperature before cleaning it. It is recommended not to dip it in cold water
when it is still hot.
• Wash with warm water and a minimum of neutral detergent. Rub with a cloth, better if in natural cellulose, or
non-abrasive sponge.
• Do not use dust, iron wool, cloths and abrasive sponges.
• Do not let food be charred on the burner. In case stains/colorations may appear on the surface. These traces do
not alter the functionality of the product, and in some cases can be eliminated with this procedure: immerse the
product in hot water, with detergent, wipe gently with a cloth, better if in natural cellulose; in any case, do not use
abrasive cloths or sponges. For the most resistant stains, it is advisable to warm white vinegar and rub as indica-
ted above.
• Avoid leaving the burners in contact with food for a long time, especially if acidic, such as tomato sauce.
• Avoid contact with metal objects; if really needed, use wooden or plastic objects.
• Avoid washing in the dishwasher, a part of the product is not coated and would get irreparably damaged.
• In case of malfunction, make sure that the holes in the outer crown are perfectly clean.
CLEANING AND MAINTENANCE
– Maintenance and cleaning of total black burners with
nanotechnological coating
54
During the guarantee period repairs can only be carried out by the authorized after-sa-
les service.
Before repairing, disconnect the appliance from the mains, by unplugging it or un-
screwing the fuse.
Unauthorized interventions and repairs can cause electrocution or short circuit, therefo-
re do not carry them out. Leave these works to authorized technicians.
In case of small disturbances, it is possible to solve the problem following the instructions.
After-sales service intervention during the guarantee period is not free, if the appliance
does not work because of incorrect use.
The elimination of the faults or complaints, caused by incorrect use or installation, will
not be repaired under guarantee. In such cases, the repair costs will be borne by the
user
ATTENTION: •
•
•
•
•
•
PROBLEM SOLVING
– Guide for the resolution
Problem
The flame is uneven / unstable.
The flame from the burners
suddenly changes
The flame from the burners suddenly
changes
Burner ignition takes more time
The flame is extinguished shortly
after ignition
The grill has burner areain the
discoloured
Electric power supply in general is
uneven
The burner covers are dirty
Causes
Wrong gas setting
Wrongly assembled burner parts
Wrongly assembled burner parts
Knob pressed for too short a time or
too delicately
This is a commonplace phenomenon
resulting from high temperatures
The igniter or terminal block may be
damaged
There are food or detergent residues
between the igniter electrode and the
burner
Regular dirt
Elimination
Have an expert check the gas set-
ting
Assemble the burner correctly
Assemble the burner correctly
Keep the knob depressed longer.
Before releasing it, press it harder
Clean the grid with a metal-care de-
tergent
Check block igniter and/or and repla-
ce if terminal damaged
Carefully clean between the igniter
electrode and the burner
Clean the burner covers with a me-
tal care detergent.
Small solvable problems without the help
of a skilled technician
37
Officine Gullo