Officine Gullo ELG 90, Instructions For Installation And Use Manual

Page: 22 / 66

25
USER
Before the first use
Induction
Adjuster (Knob)
Switching on a cooking
area
Switching off a cooking
area
Automatic switching off
of the device
*
Clean your hob with a damp cloth, and then dry the surface thoroughly.
There is a coil underneath each cooking zone which, when a pot is placed on it, genera-
tes a variable electromagnetic field, producing inductive power of a ferromagnetic sub -
stance on the bottom of the pot. The end result is that the bottom of the pot placed abo-
ve the cooking zone is heated. The type of material constituting the pot is fundamental:
- All pots with a ferromagnetic bottom are suitable (this can be verified with a magnet)
- The following pots should not be used: copper, stainless steel, aluminum, glass,
wood, ceramics
The cnob does not show any numbers, the power level will be visible on the display.
Turn the relevant knob clockwise. On the hob display the set power level will appear
(from 1 to 9)
A cooking area is switched off by turning the respective knob counterclockwise. The
symbol [0] appears on the hob display for 15 seconds, then it disappears from the di-
splay or changes to the symbol [H] if the cooking area is still hot.
The device switches off automatically if any conditions of excess temperature or errors
in the power supply occur.
INSTRUCTIONS FOR USE
– Use of the induction hob
Pot of magnetic material
Induction hob
Electromagnetic coil
Officine Gullo 20