Oce VarioPrint 5000, Operating Manual

Page: 130 / 360

5.9 Printing with Two Colors
120
A29246-X17-X-4-7680 / do501.fm
5.9 Printing with Two Colors
With printing systems with the Océ CustomTone
®
option, you can print with two colors.
You can also use MICR QCDS (Quick Change Developer Station).
For equipping the print units, the following combinations are permitted.
Before printing, check to ensure that the proper stations have been installed. If not, replace
the corresponding stations using a special trolley for that purpose.
This section contains information on the following topics:
5.9.1 Preparing the Trolley >>> page 121
5.9.2 Replacing fuser station >>> page 126
5.9.3 Replace developer station >>> page 139
5.9.4 Menu settings for color printing >>> page 152
5.9.5 Automatic menu settings when using MICR >>> page 152
Important
Note when using MICR
When using MICR, the developer station and the fuser station must be MICR-
compatible.
The upper and lower fuser stations must always be the same type. This means that
when you want to print using MICR, both fuser stations must be MICR-compatible
(type A1).
Lower print unit Upper print unit Valid print mode
Black Black Monochrome auto mode
Black Color CustomTone Automode;
Duplex
MICR Black Duplex
MICR Color CustomTone Automode;
Duplex
MICR MICR Monochrome auto mode
Color Black CustomTone Automode;
Duplex
Black MICR Duplex
Color MICR CustomTone Automode;
Duplex